Stack of business cards beside a ruler and a layout sketch, showing standard business card size and layout planning for a business card maker.
AI-generated editorial illustration of business cards, a ruler and a layout sketch. The scene is illustrative, not a product screenshot or a measured tool result.
guide

Business Card Size, Layout and Template: What to Put on a Card

Common business card sizes, a business card template layout to start from, what to put on a card and leave off, and how to check the fit before you print.

Pixoate Team9 min read

Written by the Pixoate team. We check how each tool behaves before we describe it, and we date any prices or portal rules we quote.

You need cards for an event, and two questions hold you up. Which business card size should you choose, and what actually goes on it? Printers want the size. The people you hand a card to want your name and a way to reach you, without hunting for either.

Common sizes are about 3.5 × 2 inches in the United States and 85 × 55 mm in many other places. This guide covers those business card sizes, what to put on a card and what to leave off, how to choose a business card template layout and check that the text fits, and how to make and print a sheet with the business card maker.

Four steps before you open the maker

  1. Pick the size your printer uses. Ask for its template before you design.
  2. Write only what the reader needs in the next minute: your name, your role, your business name, one or two ways to reach you and a web address.
  3. Choose a layout and a theme, create the PDF and read every line at full size.
  4. Print one test page on plain paper at actual size, measure a card, then print on cardstock and cut.

Business card size: pick by where it will be printed

Where it is printed Common size Notes
United States and Canada 3.5 × 2 inches, about 89 × 51 mm Most print shops there work in inches
Many other countries 85 × 55 mm A common international size
A specific printer Whatever its template says Ask for the template first

The maker produces 85 × 55 mm cards only, in landscape orientation, and only one side. An 85 × 55 mm card is about 4 mm narrower and 4 mm taller than a 3.5 × 2 inch card. That is a small difference, but a US print shop may need to trim or scale the artwork, so ask before you order.

What to put on a card, and what to leave off

Start with what the reader needs in the next minute:

  • Your name.
  • Your role, or a few words about what you do.
  • Your business name, if you have one.
  • One or two ways to reach you, such as a phone number and an email address. Use the ones you actually answer.
  • A web address, if it helps people check you out.

Add a street address only if people visit you, and a social handle only if that is where you work. Leave off every channel you do not use, long taglines and anything that makes the card look crowded. A card with white space is easier to read than one packed to the edges.

The maker's Details tab follows this list: Full name, Job title, Company, Email, Phone, Website and Address. An empty contact field is skipped when the card is drawn. The cards are text only, so there is no logo, photo or QR code. If you want a code that opens your website, make a QR code separately and add it to the finished card in a design or PDF editor.

Choose a business card template layout and check the fit

The maker has 3 layouts and 6 color themes, which work as ready-made starting points.

  • Left aligns your details to the left with an accent bar. It is the most conservative choice.
  • Center stacks everything in the middle. It suits a short name and few lines.
  • Split fills half of each card with the accent color and sets your name, title and company in white on it. The contact lines sit on the other half.

Pick a theme (Indigo, Slate, Emerald, Rose, Amber or Ink) or open the Colors tab to enter exact Accent, Background and Text colors for a brand. Check contrast as you go. In Split, white text sits on your accent color, so pick an accent dark enough for white text.

Fit is the part people miss. The PDF does not wrap or shrink text, so a long name or address can run past the edge of the card, and in Split a long name can run off the colored half onto the light area, where white text is hard to see. The preview on the page is approximate. Open the downloaded PDF at full size, read every line and shorten anything that gets near an edge.

A worked example

Suppose an electrician, Dana Reyes, wants cards for a trade fair. Customers call her and visit her website, but they do not visit a workshop, so she leaves the street address blank. She fills in the name, the job title Electrician, the company name, one phone number, one email address and the website. Her company name is long, so she compares Left and Center and picks Left, which leaves more room on each line than Split would. She creates the PDF, reads each line at full size, prints a test page, and measures one card with a ruler: 85 mm wide and 55 mm tall.

Make the cards and print them

  1. Fill in the Details tab, then choose a layout and a theme on the Style tab.
  2. Select Create my card PDF and download the sheet from the result page. It holds 10 cards, in 2 columns and 5 rows, on one A4 page, each 85 × 55 mm.
  3. Print one test page on plain paper at actual size, with no "fit to page", and measure a card with a ruler.
  4. Look at the top and bottom rows. They sit about 5 mm from the paper's edge, which some printers cannot reach.
  5. Print on cardstock your printer can take, then cut along the faint outline around each card.

The maker does not print, ship or sell cards, and the PDF has no bleed area or crop marks. If a print shop asks for bleed or another size, tell them what the file is and ask what they need.

When something looks wrong

What you see Likely cause What to do
A name runs onto the light half in Split The text is not wrapped or shrunk Shorten the name, or use Left or Center
The top or bottom row is clipped Some printers cannot print that close to the paper edge Check the test page, or ask a print shop
The print shop asks for bleed The file has no bleed or crop marks Tell them what the file is, or use your own stock
White text is hard to read The accent color is too light Pick a darker accent in the Colors tab
The PDF is not created A character outside Western European letters Use Latin letters in the fields

Home printing or a print shop: how to decide

The sheet from the maker suits small, quick jobs: a trade fair next week, a handful of cards for a new role, or a trial run to see how people react. Home printing has limits you will notice. Cardstock thickness depends on what your printer can feed, cutting by hand leaves slightly uneven edges, and colors on a home printer drift from what the screen showed.

A print shop makes sense when you need a large batch, a heavier stock, a coated finish or colors that match a brand guide. In that case, ask what file they accept and whether they need bleed. Because the PDF from the maker has no bleed or crop marks, some shops will ask you to rebuild the design in their own template. That is a normal outcome, not a fault. You can still use the maker to settle the wording and layout first, then carry the text across.

If you are unsure, print one sheet at home, hand a few cards to people you trust, and ask whether they can read the phone number without squinting. Their answer will tell you more than any size chart.

Reading the card at arm's length

Most people glance at a card for a few seconds, often in poor light. Hold your printed test card at arm's length. Your name and the contact lines should still be readable. If you have to lean in, the text is too long or the accent color is too close to the background. Remember that the PDF does not shrink text for you, so the fix is fewer words, not a smaller font.

Cards you receive: turn them into contacts

Cards go both ways. If you come home from the event with a pile, the business card scanner reads the name, title, company, email, phone and website from a photo of a card and gives you a vCard (.vcf) to review and import. Check every field before you import it, because a misread digit in a phone number is easy to miss.

Frequently asked questions

Should I put my address on a business card?

Only if people visit you. A phone number, an email address and a web address cover most needs, and leaving the street address blank makes room for the lines people will actually use.

What if my name or company is too long for the card?

Try Left or Center instead of Split, and shorten the line if you can. The PDF does not wrap or shrink text, so check the downloaded file at full size and fix anything near an edge.

How do I check that the printed card is the right size?

Print one test page at actual size, with no "fit to page", and measure a card with a ruler. It should read 85 mm wide and 55 mm tall.

Can I order a US-size card from this sheet?

Not directly. The sheet is 85 × 55 mm, which is close to the common US size but not identical. A print shop may trim or scale it, so ask them before you pay, and look at a proof.

Fill in only the fields you really need, create your card sheet, and print one test page before you commit to cardstock.

You may also like

Watch each transformation land

Every photo crosses the slash untouched and comes out the other side finished.