Count vehicles in a car park from an aerial photo
Works with JPG, PNG, WEBP · Free up to 20 MB, Premium 50 MB
Shoot the area from directly above in a single pass so the vehicles sit flat in frame and do not hide each other — counted detections receive dots for review. Built for surveyors, site managers, solar installers and car park operators — review and correct each photo before adding it to a CSV or PDF tally.
- Review the photo, then count visible vehicles
- Count without marking; add example boxes if you need a guided recount
- Stop counting the same vehicles twice to be sure of the total
- Free to use · No signup required · Without watermark
Works with JPG, PNG, WEBP · Free up to 20 MB, Premium 50 MB
Upload Image
Tips for an accurate count
• Use an even, well-lit photo with the vehicles fully in frame
• Check that each marked example boxes a whole vehicles rather than a repeated part
• Dots and heatmap show retained detections — review and correct the tally
About the Vehicles Counter
The vehicles counter counts visible vehicles from your photo and marks detections for review. Auto mode uses the selected item name. For a guided recount, mark up to three examples of what you want counted. Visibility, overlap and similar-looking items can affect the total. Built for surveyors, site managers, solar installers and car park operators.
How It Works
1. Photograph your vehicles
2. Check that vehicles is selected, then choose Count
3. Review the markers and correct the tally; add example boxes for a guided recount if needed
4. Add to the tally sheet and export your count as CSV
Perfect For
• Occupancy snapshots of a car park at set times of day
• Stock counts across a dealership or fleet yard
• Event parking records for a site report
• Comparing two drone passes over the same lot
Counting vehicles in a car park or yard from an aerial photo
Vehicles are counted from above for car park occupancy at set times of day, for stock at a dealership or fleet yard, for event parking records, and to compare two passes over the same lot. One straight-down photo from a drone or a rooftop shows every visible car roof as a separate shape, which suits a marked count well.
Keep the camera pointing straight down and the height the same between passes, so occupancy figures compare like for like. Trees, canopies and the upper deck of a multistory car park hide whatever is under them, so shoot each level or section separately. A yard with cars, vans and trucks counts better with one example of each in Similar items. Low sun throws long shadows that can join cars parked close together, so midday light is easier to read.
Each section becomes a row labelled with the time of the pass once its markers are checked. With many sections to cover, Bulk audit on Premium counts up to 60 photos in one run in Distinct objects mode and adds each to the tally. Arrays on the same site go on the solar panel counter, and people at the same event are counted with the drone crowd counter.
Aerial pass checks
- Camera pointing straight down
- The same height for every pass you compare
- Each deck or section photographed on its own
- Pass time written in the tally label
Frequently asked questions
- How high should the drone or camera be?
- High enough that the whole area fits in one frame, low enough that each item is still a clear shape — a few dozen pixels across is a good target. Keep the camera pointing straight down and the light even, then review every marker before using the total. Two passes only compare with each other if the height and angle match.
- Can it count cars across a whole car park?
- It marks the vehicles it can see from above, so one overhead frame covers one visible level. Trees, canopies and decked levels hide cars underneath them. Shoot each level or section separately, review the markers, and add each one as its own tally row.
- What if the photo has more than just vehicles in it?
- Auto mode uses the selected item name to find what to count. For a guided recount, mark one complete, clearly visible vehicles — up to 3 examples for different-looking kinds. Similar-looking distractors can still affect the result, so review every marker before using the total.
- Can I count several photos into one total?
- Yes — count each photo and add every reviewed result to the tally sheet as a labelled row. If you use example boxes, mark them separately on each photo. Export the tally as CSV or a PDF report, or save it to your account.
- Is it free and private?
- Yes. You can count, review and download a free result without an account. Downloads are free without a watermark. No signup required. Server-processed photos are encrypted in transit and removed under our Security policy.
What you can do with Object Counter
Review the main capabilities before you begin.
- Count objects in a photo instead of tallying by hand
- Tally coins, pills, cells, parts and beads
- Optionally mark an example to target a specific item
- Review counted detections with overlay markers
- Run a bulk audit across many photos
- Fine-tune sensitivity to ignore tiny specks
Settings reference
12 settings
Available controls for Object Counter.
Upload
- Single photo / Bulk auditPresets
- Choose a single-photo count or a Premium bulk audit. Review every result.Options: Single photoBulk audit
Count
- Add to tallyOne-click
- Add this photo as a row in the current stock-take.
- Counting modePresets
- Chooses the counting engine: Auto and Similar items count from your marked examples — mark 1 to 3, one complete object per different-looking kind; Distinct objects labels separate, fully visible items without an example.Options: AutoSimilar itemsDistinct objects
- Included markersSliderRange: 0–1 · Default: 0.21
- Starts at 21%; slide toward Show more to include weaker markers or Only strongest to hide them.
- Overlay stylePresets
- Choose dots, a heatmap, both or a clean preview.Options: BothDotsHeatNone
- What to countText input
- Type the item to count, such as cow, bottle or car, so other objects in the photo are ignored; leave it blank to count everything.
- Detection sensitivitySliderRange: 0–1 · Default: 0.5
- Adjust detection sensitivity for larger or smaller visible items.
Examples
- Mark example itemsDraw on image
- Drag a tight box around one complete, clearly visible item. The counter uses it as a visual reference; review every result marker for lookalikes or missed items.
Tally
- LabelText input
- Rename this row so it is identifiable in the exported stock-take.
- CountNumber input
- Correct this row's count; totals and exports update automatically.
Advanced
- Result overlayDropdown
- Choose how count markers appear on the downloaded result.Options: Dots + heatmapDots onlyHeatmap only
- Ignore small detectionsSliderRange: 0–1 · Default: 0
- Ignore detections below the selected size.
Related tools for Object Counter
Tools for common next steps after Object Counter.
Counting & Inventory
Live Object Counter
Aim your phone at separated, fully visible items and review the detector markers as the count updates in real time.
Try it now
Counting & Inventory
People Counter
Estimate how many people appear in a photo. Review the markers and verify the count before official use.
Try it now
OCR & Data Extraction
Image to Text (OCR)
Extract editable text from a screenshot, photo or scan in 30+ supported languages.
Try it nowHow Object Counter helps you get it done
Real problems it solves every day — for businesses, creators, and everyday tasks. Find the use case that fits you and start.
Reviewed Warehouse Cycle Counts
Use Bulk audit to run Distinct objects mode across every shelf photo in the queue, review every result, and correct the per-shelf tally before exporting a cycle count.
Small-Parts Inventory for Makers & Etsy Sellers
Mark the bead, screw or component you need in the Examples setting — 1-3 examples, one per part type — then run the count. Review the matching markers for background mistakes, then add the corrected result to the tally sheet.
Classroom & Lab Supply Counts
Create an AI-assisted draft of dice, counters, test tubes or lab kits, then review and correct the markers before exporting a reorder tally.
Shareable Stock-Take Reports for Teams
Save a completed stock-take to your account, generate a branded PDF report, and share a read-only link so managers or teammates can review the count without re-uploading anything.
Batch QC Counts for Packed Finished Goods
Run Similar items mode after marking 1-3 example units in the Examples setting — one per pack type in the shot. Review every marker and correct misses or duplicates before shipping.
Hobby Collection Counts for LEGO, Trading Cards & Models
Mark 1-3 example pieces in the Examples setting — one per piece type you're counting — then run the count. Review the result markers and correct the tally instead of starting a manual count from zero.
Guides for this tool
- A Shelf Can Look Full While the Products Customers Want Run LowA full-looking shelf can hide gaps in the products people want. Explore Pixoate visible-object counts and the context needed for a useful stock review.
- How to Count Shop Inventory from Shelf PhotosCount visible shelf stock, review object markers and export a tally. Learn how to handle hidden items, mixed products and inventory discrepancies.
Watch each transformation land
Every photo crosses the slash untouched and comes out the other side finished.
