Count cement bags in a stack from a photo
AI Cement Bags Counter

Count cement bags in a stack from a photo

Works with JPG, PNG, WEBP · Free up to 20 MB, Premium 50 MB

Photograph the visible face of the stack or pallet straight-on — the AI estimates visible cement bags; review and correct each face before combining rows. Built for builders, site managers and building-material suppliers — review and correct each photo before adding it to a CSV or PDF tally.

  • Review the photo, then count visible cement bags
  • Count without marking; add example boxes if you need a guided recount
  • Stop counting the same cement bags twice to be sure of the total
  • Free to use · No signup required · Without watermark

Upload Image

Counting cement bags in a site store or on a truck

Cement is ordered, stored and used by the bag, so the number matters to the site storekeeper before every pour and to the dealer at goods-in. Bags are usually stacked in an interlocking pattern, with ends and long sides alternating from layer to layer. Photograph the face of each stack from about half its height, close enough that every bag has a clear outline; a store with stacks along two walls needs one photo per stack.

Paper bags slump and press into each other, so the seams between them fade, and cement dust settling on the bags flattens the contrast further. If the first result merges neighbors, mark one complete bag face as an example and run a guided recount; for stacks that mix brands or grades, mark one bag of each. Torn or patched bags can be skipped, so check the dots along the top layer and at the corners.

On a delivery truck only the top layer is visible from above. Counting each layer as it comes off and adding one tally row per layer gives a figure you can hold up against the delivery note. Feed, sugar and other bagged goods suit the general sack counter, stores of rice or wheat can use the grain sack page, and the bricks that arrive alongside have a brick counter of their own.

Frequently asked questions

Can it count a full stack when some items are hidden?
It can only estimate the visible photo content. For regular stacks, photograph and review each accessible face, correct the tally, and treat any multiplication by depth as an estimate. A marked image supports review but does not prove the physical quantity.
What if the photo has more than just cement bags in it?
Auto mode uses the selected item name to find what to count. For a guided recount, mark one complete, clearly visible cement bags — up to 3 examples for different-looking kinds. Similar-looking distractors can still affect the result, so review every marker before using the total.
Can I count several photos into one total?
Yes — count each photo and add every reviewed result to the tally sheet as a labelled row. If you use example boxes, mark them separately on each photo. Export the tally as CSV or a PDF report, or save it to your account.
Is it free and private?
Yes. You can count, review and download a free result without an account. Downloads are free without a watermark. No signup required. Server-processed photos are encrypted in transit and removed under our Security policy.

What you can do with Brick Counter

Review the main capabilities before you begin.

  • Count bricks and blocks on stacks and pallets
  • Review delivery and on-site stock estimates quickly
  • Inspect each counted-brick marker and correct the total
  • Audit multiple pallets in one bulk pass
  • Keep a running tally across labelled loads
  • Review tightly packed rows for missed or duplicate bricks

Settings reference

Available controls for Brick Counter.

Upload

Single photo / Bulk auditPresets
Choose a single-photo count or a Premium bulk audit. Review every result.Options: Single photoBulk audit

Count

Add to tallyOne-click
Add this photo as a row in the current stock-take.
Counting modePresets
Chooses the counting engine: Auto and Similar items count from your marked examples — mark 1 to 3, one complete brick per different-looking kind; Distinct objects labels separate, fully visible items without an example.Options: AutoSimilar itemsDistinct objects
Included markersSliderRange: 0–1 · Default: 0.21
Starts at 21%; slide toward Show more to include weaker markers or Only strongest to hide them.
Overlay stylePresets
Choose dots, a heatmap, both or a clean preview.Options: BothDotsHeatNone
What to countText input
Names the item to count and comes pre-filled with bricks; clear or change it to count a different item in the photo.
Detection sensitivitySliderRange: 0–1 · Default: 0.5
Adjust detection sensitivity for larger or smaller visible items.

Examples

Mark example bricksDraw on image
Drag a tight box around one complete, clearly visible brick. The counter uses it as a visual reference; review every result marker for lookalikes or missed items.

Tally

LabelText input
Rename this row so it is identifiable in the exported stock-take.
CountNumber input
Correct this row's count; totals and exports update automatically.

Advanced

Result overlayDropdown
Choose how count markers appear on the downloaded result.Options: Dots + heatmapDots onlyHeatmap only
Ignore small detectionsSliderRange: 0–1 · Default: 0
Ignore detections below the selected size.
Free to use · No signup required · Without watermarkUploads are encrypted in transitRemoved under our retention policy

How Brick Counter helps you get it done

Real problems it solves every day — for businesses, creators, and everyday tasks. Find the use case that fits you and start.

For Business

Review a Brick Delivery Before Unloading

Photograph the pallet for a draft brick tally, then review the physical delivery, correct the markers, and complete the normal delivery-note check before the truck leaves.

For Developers

Track Remaining Material Between Phases

Photograph the leftover stack for an AI-assisted estimate, then review and correct it against the physical stock before planning the next build phase.

Productivity

Audit a Whole Yard in One Batch

Open Bulk audit to run Distinct objects mode across every stack photo, then review every result before using the combined yard total.

On Mobile

Count Site Stock from Your Phone

Walk the site snapping each stack with your phone camera, add every result to the Tally sheet, and export the day's site stock as a CSV or PDF report for the site manager.

For Developers

Separate Bricks from Mixed Site Debris

Mark one complete brick in the Examples setting before the count runs so blocks and rubble aren't mistaken for bricks, then review every marker before using the total.

For Developers

Estimate a Full Pallet Total from a Single Face Photo

Count the bricks visible on one face of a rectangular stack, then multiply by the known depth for a fast estimate of the whole pallet — useful when climbing around a stack to photograph every face isn't practical on a busy site.

Watch each transformation land

Every photo crosses the slash untouched and comes out the other side finished.