Count washers in a tray from a photo
Works with JPG, PNG, WEBP · Free up to 20 MB, Premium 50 MB
Spread the washers one layer deep on a tray or flat surface and photograph from directly above — counted detections receive dots for review. Built for factories, fastener suppliers and maintenance stores — review and correct each photo before adding it to a CSV or PDF tally.
- Review the photo, then count visible washers
- Count without marking; add example boxes if you need a guided recount
- Stop counting the same washers twice to be sure of the total
- Free to use · No signup required · Without watermark
Works with JPG, PNG, WEBP · Free up to 20 MB, Premium 50 MB
Upload Image
Tips for an accurate count
• Use an even, well-lit photo with the washers fully in frame
• Check that each marked example boxes a whole washers rather than a repeated part
• Dots and heatmap show retained detections — review and correct the tally
About the Washers Counter
The washers counter counts visible washers from your photo and marks detections for review. Auto mode uses the selected item name. For a guided recount, mark up to three examples of what you want counted. Visibility, overlap and similar-looking items can affect the total. Built for factories, fastener suppliers and maintenance stores.
How It Works
1. Photograph your washers
2. Check that washers is selected, then choose Count
3. Review the markers and correct the tally; add example boxes for a guided recount if needed
4. Add to the tally sheet and export your count as CSV
Perfect For
• Kitting counts where small parts are easily miscounted
• Goods-in verification of bulk packs
• Bin stock checks in a maintenance store
• Confirming quantities before a production run starts
Counting washers before they slide under one another
Washers are thin, flat and slippery, so a handful tipped onto a tray overlaps like fish scales, and two overlapping washers can be read as one. Maintenance stores, kitting benches and goods-in teams count them because they are the part most often miscounted by hand: cheap, small and easy to lose track of in a bulk pack. Getting them into one clean layer matters more here than with almost any other fastener.
Spread washers with a flat ruler or a card until each one shows its full ring with the tray visible through the hole. A dark tray makes that hole read clearly against a bright washer. Oily washers cling together in pairs, so wipe them or tap the tray before you shoot. Split lock washers, flat washers and wide fender washers look different from above; mark one of each in Similar items, up to three, and compare the per-example split with what you laid out.
Very small washers are where the size settings matter. In Distinct objects mode, leave Ignore small detections at Off and slide Detection sensitivity toward Smaller items if markers are missing, then review each marker and correct the tally row. Hex nuts and rivets from the same kit can follow as further rows.
Washer tray setup
- Dark, matte tray so the center hole shows
- One layer, no washer resting on another
- Flat, lock and fender washers separated, or one of each marked
- Oily washers wiped so they do not cling in pairs
Frequently asked questions
- Do the items need to be separated before counting?
- Slight touching can work, but full overlaps hide items and make the result less reliable. Spread them one layer deep under even light, mark a clear example, and review every result marker.
- What if the photo has more than just washers in it?
- Auto mode uses the selected item name to find what to count. For a guided recount, mark one complete, clearly visible washers — up to 3 examples for different-looking kinds. Similar-looking distractors can still affect the result, so review every marker before using the total.
- Can I count several photos into one total?
- Yes — count each photo and add every reviewed result to the tally sheet as a labelled row. If you use example boxes, mark them separately on each photo. Export the tally as CSV or a PDF report, or save it to your account.
- Is it free and private?
- Yes. You can count, review and download a free result without an account. Downloads are free without a watermark. No signup required. Server-processed photos are encrypted in transit and removed under our Security policy.
What you can do with Object Counter
Review the main capabilities before you begin.
- Count objects in a photo instead of tallying by hand
- Tally coins, pills, cells, parts and beads
- Optionally mark an example to target a specific item
- Review counted detections with overlay markers
- Run a bulk audit across many photos
- Fine-tune sensitivity to ignore tiny specks
Settings reference
12 settings
Available controls for Object Counter.
Upload
- Single photo / Bulk auditPresets
- Choose a single-photo count or a Premium bulk audit. Review every result.Options: Single photoBulk audit
Count
- Add to tallyOne-click
- Add this photo as a row in the current stock-take.
- Counting modePresets
- Chooses the counting engine: Auto and Similar items count from your marked examples — mark 1 to 3, one complete object per different-looking kind; Distinct objects labels separate, fully visible items without an example.Options: AutoSimilar itemsDistinct objects
- Included markersSliderRange: 0–1 · Default: 0.21
- Starts at 21%; slide toward Show more to include weaker markers or Only strongest to hide them.
- Overlay stylePresets
- Choose dots, a heatmap, both or a clean preview.Options: BothDotsHeatNone
- What to countText input
- Type the item to count, such as cow, bottle or car, so other objects in the photo are ignored; leave it blank to count everything.
- Detection sensitivitySliderRange: 0–1 · Default: 0.5
- Adjust detection sensitivity for larger or smaller visible items.
Examples
- Mark example itemsDraw on image
- Drag a tight box around one complete, clearly visible item. The counter uses it as a visual reference; review every result marker for lookalikes or missed items.
Tally
- LabelText input
- Rename this row so it is identifiable in the exported stock-take.
- CountNumber input
- Correct this row's count; totals and exports update automatically.
Advanced
- Result overlayDropdown
- Choose how count markers appear on the downloaded result.Options: Dots + heatmapDots onlyHeatmap only
- Ignore small detectionsSliderRange: 0–1 · Default: 0
- Ignore detections below the selected size.
Related tools for Object Counter
Tools for common next steps after Object Counter.
Counting & Inventory
Live Object Counter
Aim your phone at separated, fully visible items and review the detector markers as the count updates in real time.
Try it now
Counting & Inventory
People Counter
Estimate how many people appear in a photo. Review the markers and verify the count before official use.
Try it now
OCR & Data Extraction
Image to Text (OCR)
Extract editable text from a screenshot, photo or scan in 30+ supported languages.
Try it nowHow Object Counter helps you get it done
Real problems it solves every day — for businesses, creators, and everyday tasks. Find the use case that fits you and start.
Reviewed Warehouse Cycle Counts
Use Bulk audit to run Distinct objects mode across every shelf photo in the queue, review every result, and correct the per-shelf tally before exporting a cycle count.
Small-Parts Inventory for Makers & Etsy Sellers
Mark the bead, screw or component you need in the Examples setting — 1-3 examples, one per part type — then run the count. Review the matching markers for background mistakes, then add the corrected result to the tally sheet.
Classroom & Lab Supply Counts
Create an AI-assisted draft of dice, counters, test tubes or lab kits, then review and correct the markers before exporting a reorder tally.
Shareable Stock-Take Reports for Teams
Save a completed stock-take to your account, generate a branded PDF report, and share a read-only link so managers or teammates can review the count without re-uploading anything.
Batch QC Counts for Packed Finished Goods
Run Similar items mode after marking 1-3 example units in the Examples setting — one per pack type in the shot. Review every marker and correct misses or duplicates before shipping.
Hobby Collection Counts for LEGO, Trading Cards & Models
Mark 1-3 example pieces in the Examples setting — one per piece type you're counting — then run the count. Review the result markers and correct the tally instead of starting a manual count from zero.
Guides for this tool
- A Shelf Can Look Full While the Products Customers Want Run LowA full-looking shelf can hide gaps in the products people want. Explore Pixoate visible-object counts and the context needed for a useful stock review.
- How to Count Shop Inventory from Shelf PhotosCount visible shelf stock, review object markers and export a tally. Learn how to handle hidden items, mixed products and inventory discrepancies.
Watch each transformation land
Every photo crosses the slash untouched and comes out the other side finished.
